The bayesmeta package provides a collection of functions to facilitate easy Bayesian inference in the generic random-effects meta-analysis model. It allows to derive the posterior distribution of the two parameters (effect and heterogeneity), and provides the functionality to evaluate joint and marginal posterior probability distributions, predictive distributions, shrinkage, etc. This document demonstrates the bayesmeta package’s usage in a worked-out example.

The problem

Estimates and standard errors

In the meta-analysis context one is faced with the problem of having to merge results from individual experiments (or studies or sources,…) to a joint result. The problem is most commonly formulated in terms of estimates (or effect sizes) and associated standard errors. For example, have a look at the following data set:

library("bayesmeta")
data("Rubin1981")
print(Rubin1981)
##   school effect stderr
## 1      A  28.39   14.9
## 2      B   7.94   10.2
## 3      C  -2.75   16.3
## 4      D   6.82   11.0
## 5      E  -0.64    9.4
## 6      F   0.63   11.4
## 7      G  18.01   10.4
## 8      H  12.16   17.6

The data set summarizes the results from a study on the effects of coaching programs at eight different schools. In order to compare the schools’ success, students filled out standardized questionnaires before and after the coaching, and each school’s mean increase in the score (the “effect” column) along with the standard error (the “stderr” column) was recorded. You may also consult the help (via help("Rubin1981")) for more details.

The problem in general is that we have several numbers with associated uncertainties given, and that we want to combine these into a joint (average or mean) result, while also accounting for potential extra variability (heterogeneity) between these. The individual estimates may for example correspond to different studies that were performed, or to subgroups of a larger sample.

Computing effect sizes

Quite often estimates along with their standard errors are not given right away, so one has to determine these oneself. For example, study results are often summarized in terms of a contingency table like the following one; here patients were exposed to two different therapies, and the number of patients experiencing certain events were counted in both groups:

	event	no event	total
therapy A (“experimental”)	14	47	61
therapy B (“control”)	15	5	20

One of the columns is actually redundant here, as it is determined by the remaining two; the experiment’s outcome may hence be summarized through 4 numbers. You can now compute for example the logarithmic odds ratio (log-OR) as an effect size in order to quantify the difference between the two treatment groups. The log-OR would be given by $\log\bigl(\frac{14 \times 5}{47 \times 15}\bigr)$, and you may also proceed and determine the associated standard error.

Calculation of common effect sizes like the log-OR along with standard errors however is already implemented, for example in the metafor or compute.es packages, so it is easiest to utilize these. The data from the above table is actually taken from another meta analysis example:

data("CrinsEtAl2014")
print(CrinsEtAl2014[,c(1,10,12,13,15)])
##       publication exp.AR.events exp.total cont.AR.events cont.total
## 1  Heffron (2003)            14        61             15         20
## 2  Gibelli (2004)            16        28             19         28
## 3 Schuller (2005)             3        18              8         12
## 4 Ganschow (2005)             9        54             29         54
## 5    Spada (2006)             4        36             11         36
## 6     Gras (2008)             0        50              3         34

The above example appears in the first row here. This data set contains the results from six such studies, along with information on other covariates and additional endpoints. Again, you can check the help (via help("CrinsEtAl2014")) for more details on this data set. The log-ORs may for example be computed using the metafor package’s escalc() function:

library("metafor")
crins.es <- escalc(measure="OR",
                   ai=exp.AR.events,  n1i=exp.total,
                   ci=cont.AR.events, n2i=cont.total,
                   slab=publication, data=CrinsEtAl2014)
print(crins.es[,c("publication", "yi", "vi")])
##       publication      yi     vi
## 1  Heffron (2003) -2.3097 0.3594
## 2  Gibelli (2004) -0.4595 0.3096
## 3 Schuller (2005) -2.3026 0.7750
## 4 Ganschow (2005) -1.7579 0.2078
## 5    Spada (2006) -1.2585 0.4122
## 6     Gras (2008) -2.4179 2.3373

The effect sizes and (squared!) standard errors are provided in the “yi” and “vi” columns.

In addition to log-ORs, a whole range of other effect sizes exist (like standardized differences, relative risks, measures based on correlations, etc.). For more details see also the references below, or the metafor or compute.es documentations.

The random effects model

When we estimate a parameter (like the percentages or log-ORs in the previous example), such estimates are always associated with some uncertainty that may be expressed in terms of a standard error. Suppose that there is a parameter $\mu$ that we want to estimate. We have an estimate $y$ that is associated with a standard error $\sigma$. A simple model to capture the estimation process would be to assume \[ y \sim \mbox{Normal}(\mu, \sigma^2) \mbox{,}\] i.e., our estimate $y$ comes about as a normal random variable with mean $\mu$ and variance $\sigma^2$. In our model, we have one unknown (the true “effect” $\mu$), and our known data are $y$ and $\sigma$. In the meta-analysis context, we usually have several estimates $y_i$ (with standard errors $\sigma_i$ and $i=1,\ldots,k$) for the same parameter available, so an obvious generalization would be to assume \[ y_i \sim \mbox{Normal}(\mu, \sigma_i^2) \mbox{.}\] This is in fact the so-called fixed-effect model. We still have one unknown parameter ($\mu$), and the data consist of $2k$ numbers $y_1,\ldots,y_k$ and $\sigma_1,\ldots,\sigma_k$.

However, it is often reasonable to assume that the different estimates ($y_i$) may differ slightly from each other, by more than what can be attributed to the estimation uncertainty (given by the $\sigma_i$) alone. This additional (“between-study”) variability, the heterogeneity, may be modeled by another variance component. The idea is that each estimate $y_i$ estimates a study-specific parameter $\theta_i$, while these study specific means $\theta_i$ again vary around the common “overall” mean $\mu$. The additional variation is expressed via the heterogeneity variance $\tau^2$: \[ y_i \sim \mbox{Normal}(\theta_i, \sigma_i^2) \mbox{,}\] \[ \theta_i \sim \mbox{Normal}(\mu, \tau^2) \mbox{.}\] This adds another $k+1$ unknowns, the study-specific means $\theta_i$ and the heterogeneity $\tau$, to the model. The model may however be simplified again by integrating over the $\theta_i$ and expressing the model in the equivalent form \[ y_i \sim \mbox{Normal}(\mu, \sigma_i^2 + \tau^2) \mbox{.}\] This is the random-effects model. The additional parameter $\tau$ captures differences between the estimates (or between studies,…) that are beyond the mere estimation uncertainty. As one might imagine, the heterogeneity is often hard to estimate, since the information on $\tau$ in the data is very limited, especially when the number of estimates ($k$) is small. In the special case of $\tau=0$, the random effects model again simplifies to the fixed-effect model.

Parameter estimation in the random effects model

The technical side

Prior & posterior

Our information on the parameters is provided through the posterior (probability) distribution, associating parameter values with probabilities given our data at hand. From Bayes’ theorem we know that our knowledge about the probable parameter values depends on

the likelihood (the data, and the model that we assume for the data), and
our prior information (any other information external to our data).

In order to proceed, we have to specify both. Here we are concerned with the random effects model as specified above; this determines our likelihood function. For technical reasons we will also assume that a priori the effect and heterogeneity parameters are independent, so that their joint probability density function may be written as \[ p(\mu, \tau) = p(\mu) \times p(\tau) \] and we can specify the priors $p(\mu)$ and $p(\tau)$ separately.

Prior information for the effect parameter $\mu$

The prior distribution for $\mu$ expresses what we know about the effect before considering the data. Again for technical reasons we restrict ourselves to two choices here: either a normal distribution (with pre-specified mean and variance parameters), or an (improper) uniform distribution on the complete real line. If, for example, we want to assign 95% probability to a particular interval $[a,b]$, then we could use a prior mean of $\frac{a+b}{2}$ and a standard deviation of $\approx \frac{b-a}{4}$. Increasing the standard deviation will (in a sense) usually lead to a “more conservative” or “less informative” prior distribution. The uniform prior may be seen as the limiting case of indefinitely increasing prior variance.

Prior information for the heterogeneity parameter $\tau$

The prior distribution for the heterogeneity parameter needs to be specified in terms of its (prior) density function. Popular choices here are e.g. half-normal distributions, or heavier-tailed variants like half-Student-t or half-Cauchy distributions. Again, an (improper) uniform prior may be an option, but this must be used with much caution. As its density does not integrate to one, the derived results may in turn also be invalid; this is especially the case for very small values of $k$.

Inference

The posterior density is denoted by $p(\mu, \tau | y, \sigma)$. This is the conditional distribution of $\mu$ and $\tau$ given the values of $y$ and $\sigma$, which here are our ($k$-dimensional) vectors of estimates $y_i$ and associated standard errors $\sigma_i$. The posterior density effectively results as the product of the prior density $p(\mu,\tau)$ and the likelihood function $p(y|\sigma,\mu,\tau)$. Having this (joint, 2-dimensional) density alone, however, is of little practical use. Usually, one is mainly interested in the effect $\mu$, while the heterogeneity $\tau$ constitutes a nuisance parameter that needs to be accounted for, but that is not of primary interest. In order infer the effect $\mu$, one needs to integrate over the posterior distribution: \[ p(\mu | y, \sigma) = \int p(\mu, \tau | y, \sigma) \, \mathrm{d}\sigma \mbox{.} \] The resulting marginal distribution of $\mu$ then expresses the (posterior) information about the effect. In order to quantify this information, what is of interest are numbers like the expectation, standard deviation, or quantiles of this distribution; these again result as integrals over the marginal density. The bayesmeta package provides functions to evaluate all these integrals of interest.

The practical side

A simple example

Consider again the 8-schools example (see also above). We have 8 mean differences (increase in score) given, along with the associated standard errors. Suppose we were interested in estimating the mean score across all 8 schools. First we need to specify our prior information about the two unknowns (mean effect $\mu$ and heterogeneity $\tau$). From the description (check help("Rubin1981")) we know that the original (total) scores should be centered around 500 and range between 200 and 800. To be conservative (and to take a “neutral” position), let us assume a normal prior for $\mu$ centered around a mean of 0, with a standard deviation of 50 for the score differences (score increase before/after coaching). We also know little about the variation to be expected between schools. Again from the description we know that individual students’ results have a standard deviation of around 100, so it seems safe to assume that schools will not differ from each other by much more than, say, 25. We will then use a half-Cauchy prior with scale 25 for the heterogeneity $\tau$.

In order to implement the analysis we use the bayesmeta() function, which actually provides the main functionality of this package. We have to provide it with the data and out prior specifications. For the effect prior ($p(\mu)$) we only need to specify the normal parameters (mean and standard deviation). For the heterogeneity prior ($p(\tau)$) we need to provide the prior density function. The following function call will execute the analysis:

data("Rubin1981")
taupriordensity <- function(t){dhalfcauchy(t, scale=25)}
schools.example.1 <- bayesmeta(y     = Rubin1981[,"effect"],
                               sigma = Rubin1981[,"stderr"],
                               label = Rubin1981[,"school"],
                               mu.prior.mean=0, mu.prior.sd=50,
                               tau.prior=taupriordensity)

The computation may take a few seconds. We can then have a look at the results. A simple print() call will already provide a comprehensive summary:

print(schools.example.1)
##  'bayesmeta' object.
## 
## 8 estimates:
## A, B, C, D, E, F, G, H
## 
## tau prior:
## function(t){dhalfcauchy(t, scale=25)}
## 
## mu prior:
## normal(mean=0, sd=50)
## 
## ML and MAP estimates:
##                      tau       mu
## ML joint     0.007896288 7.870477
## ML marginal  0.000000000       NA
## MAP joint    0.001207621 7.817184
## MAP marginal 0.000000000 7.929503
## 
## marginal posterior summary:
##                 tau        mu
## mode       0.000000  7.929503
## median     4.758862  7.962958
## mean       5.884185  7.985715
## sd         4.869769  4.996816
## 95% lower  0.000000 -1.821568
## 95% upper 15.170271 17.828136

First we see the number (and labels) of the provided estimates. We see the prior specifications, and some first point estimates, the “classical” maximum likelihood (ML) parameter estimates, as well as the maximum-a-posteriori (MAP) estimates for $\mu$ and $\tau$. There are “joint” estimates (based on the joint likelihood or joint posterior density) as well as “marginal” estimates (based on marginal likelihood or posterior density). Most importantly, the section “marginal posterior summary” lists characteristics of the marginal posterior distributions of $\tau$ and $\mu$. We can see that the estimated mean score increase is roughly at 8 points with a 95% interval ranging from -2 to 18.

The posterior distribution may be illustrated further by calling the plot() function; this will generate 4 plots:

plot(schools.example.1, prior=TRUE)

The first plot is the “forest plot” showing the 8 estimates along with their 95% confidence intervals (8 horizonal lines labelled “A”–“H” at the top) along with the combined estimate (the diamond at the bottom, centered at the posterior median and spanning the 95% interval) and a predictive interval (the bar at the bottom, spanning the 95% prediction interval). The prediction interval is always longer than the posterior interval for the effect $\mu$, and it indicates the expected range for a “new” estimate ($\theta_{k+1}$, a “9th school” in this example).

The second plot illustrates the joint posterior density of both parameters $\mu$ and $\theta$; a darker shading indicates higher posterior density values. The red contour lines show (approximate) 90%, 95% and 99% confidence regions for the joint distribution. The solid blue line traces the conditional posterior expectation value $\mathrm{E}[\mu|\tau,y,\sigma]$, and the dashed lines enclose the corresponding 95% interval as a function of $\tau$. The green lines indicate marginal posterior median and 95% intervals for both parameters.

The third and fourth plot show the marginal density functions of $\mu$ and $\tau$, respectively. The posterior median and (highest posterior density) 95% interval are also indicated by a vertical line and a darker shading. When the “prior=TRUE” option is used (as in this example), the dashed line also shows the prior density in comparison.

From the last two plots one can see that – within the range of the posterior distribution – the prior density appears almost “flat”. So an obvious question is what happens if we simply take the prior to be uniform; this is achieved by simply using the default options:

schools.example.2 <- bayesmeta(y     = Rubin1981[,"effect"],
                               sigma = Rubin1981[,"stderr"],
                               label = Rubin1981[,"school"])

We can now compare the results from the two similar analyses:

print(schools.example.1$summary)
##                 tau        mu      theta
## mode       0.000000  7.929503   7.865547
## median     4.758862  7.962958   7.926826
## mean       5.884185  7.985715   7.985715
## sd         4.869769  4.996816   9.132696
## 95% lower  0.000000 -1.821568 -10.626946
## 95% upper 15.170271 17.828136  26.830622
print(schools.example.2$summary)
##                 tau        mu      theta
## mode       0.000000  8.007138   7.927789
## median     5.227735  8.055863   8.008132
## mean       6.585992  8.092137   8.092137
## sd         5.685974  5.246683  10.148130
## 95% lower  0.000000 -2.176161 -12.511951
## 95% upper 17.265778 18.406325  29.014629

The $summary element of the bayesmeta() result contains the estimates that were already shown above; the additional “theta” column refers to the predictive distribution (for a “$k+1$th” estimate, an additional “9th school” in this example). The differing prior specifications lead to very similar conclusions in this case, but, as usual, the (improper) uniform priors have to be used with caution.

More detailed analysis

The object returned by the bayesmeta() function contains a number of elements; we have seen use of the $summary element in the above example already. Have a look at the documentation (help("bayesmeta"), and the “Value” section therein) for the exact details. Some of the returned elements are functions, so you can, for example, evaluate and compare the posterior densities (of both $\mu$ or $\tau$). Consider the previous example; for the different prior settings we got different posteriors. You can compare the posterior densities (which are provided in the results’ ...$dposterior() elements) like this:

# evaluate posterior densities:
x <- seq(from=-10, to=30, length=100)
plot(x, schools.example.1$dposterior(mu=x), type="l", col="red",
     xlab=expression("effect "*mu), ylab="posterior density")
lines(x, schools.example.2$dposterior(mu=x), type="l", col="blue", lty="dashed")
abline(h=0, col="darkgrey")

You can see (again) that the results barely differ. In this example schools.example.1$dposterior is a function() that may take either a mu=... or a tau=... argument, depending on whether you want the marginal posterior density of $\mu$ or $\tau$.

The naming pattern may be familiar from other distributions that you know in R: for the normal distribution, you can get density, cumulative distribution function (CDF) or quantile function (inverse CDF) by calling the dnorm(), pnorm() or qnorm() functions. It works analogously here: say you were interested in the posterior probability that the mean effect $\mu$ is actually positive. For this, you have to evaluate the posterior CDF of $\mu$ at $\mu=0$, which is given by the ...$pposterior() element:

# posterior probability of mu > 0:
1 - schools.example.1$pposterior(mu=0)
## [1] 0.9487424

The quantile function (inverse CDF) is given by the ...$qposterior() element; if you are interested in a 95% posterior upper limit on the probable effect magnitude $\mu$, you may call

# 95% posterior upper limit on the effect mu:
schools.example.1$qposterior(mu.p=0.95)
## [1] 16.11056

Or, analogously, if you are interested in the heterogeneity parameter $\tau$:

# 95% posterior upper limit on the heterogeneity tau:
schools.example.1$qposterior(tau.p=0.95)
## [1] 15.17027

You can also derive credible intervals for the parameters from the posterior distribution; for this you can use the ...$post.interval() function:

# 95% credible intervals for the effect mu:
schools.example.1$post.interval(mu.level=0.95)
## [1] -1.821568 17.828136

The intervals are (by default) determined to be the shortest possible intervals for the given credibility level. You can see the difference by explicitly requesting a “central” interval that is determined via 2.5% and 97.5% quantiles; the difference is most obvious for asymmetric distributions like the heterogeneity parameter’s distribution:

# 95% credible intervals for the effect mu:
schools.example.1$post.interval(tau.level=0.95)
## [1]  0.00000 15.17027
schools.example.1$post.interval(tau.level=0.95, method="central")
## [1]  0.2199683 18.0622630
schools.example.1$qposterior(tau.p=c(0.025, 0.975))
## [1]  0.2199683 18.0622630

You can compare this to the above plot of the heterogeneity parameter’s posterior density; a central interval leaves 2.5% probability in each (left and right) tail of the distribution, while the shortest possible interval is a one-sided interval.

An introduction to meta-analysis using the bayesmeta package

Christian Röver

2016-07-03